Thanks a million, mate! I will do that after I receive my new samsung 4x4gb ram chips, or 4x8gb avexir core.
Ok, so that would mean erasing the data on the ssd's, and I could get the firmware on a flash stick from my girlfriend's laptop?
Do I have to make it bootable , or possibly provide bit more details on how to upgrade the firmware with that method with Intel ssd's , as I don't have any OS on a different hard drive apart from those 2 ssds.
PPS: the intel 18.104.22.1680 is the firmware?
Because not having a SO on something else, don't see how I could upgrade the firmware unless UN-RAID, clean, and do some DOS firmware flashing?
Excuse me for my uncertainty and not being thoroughly clear on this, I only know how to flash my old OCZ ssd firmware.
john7up: The Intel SSD Toolbox will flash your drives you might need to install Win7 in AHCI mode then flash one then re-install it again on the other drive to flash the other one. There used to be a ISO you can burn and boot from to update the drives im not sure if its available anymore though.
22.214.171.1240 is the driver youll use when you install Win7 on the freshly re-done RAID array.
"Humans aren't the only species on Earth, We just act like it..."