It's a budget board so there aren't any premade 3rd-party solutions. But, I have seen some "universal" products. I am wondering if there is anything one would specifically look or avoid, based on your experience with these products. I am not very skilled in DIY so I'd like to find something fairly straightforward to minimize the possibility that I would damage the board.
The board is the GA 970A UD3P 2.0
Help is greatly appreciated because the VRM temps are really holding back my overclocking.
I have an EK L360 2.0 kit water loop.
products I found:
Koolance MVR-40, MVR-100 no nozzles
HEATKILLER® SW-X DIY, SW-2, SWX-A2, SWX-G3 LT, SWX-A4
Enzotech WMST-66, WMST-73, WMST-78
EK-MOSFET GA 2X KIT-AC