The title pretty much says it all. I am looking for attachments to cut the sheet metal in my case. I usually just use a jig saw but i have been having problems with it. Thanks in advance.
Additionally, the cutting wheels come in different diameters. Getting the larger ones will ease the job and make cutting a little easier, especially if you have larger hands.
The radius of the disk dictates how close to the panel or piece being cut the hand is; too small and the disk gets forced to an angle. Not always a big deal, but something to consider.
This will become apparent if you are cutting in the middle of a large panel. as the wheel gets worn down it becomes harder to work (at least for me).
Thank you all +1 rep for your help. HOw hard is it to cut corners with them on sheet metal. Because i am making a circular hole for a fan about a 120mm one.
If you can get some diamond blade disks (we sold them at the HW store i used to work at, but they were not dremel brand disks) they work awesome.
I think the higher RPM's used, the easier corners will be to cut. But the larger the disks, the more awkward it gets to make a corner (rounded corner).
Originally Posted by Maddog7771
Thank you all +1 rep for your help. HOw hard is it to cut corners with them on sheet metal. Because i am making a circular hole for a fan about a 120mm one.
I would definatly suggest getting a 114mm hole saw to do that, from my experience cutting holes with a dremel = pain in the arse
get a bi-metal holesaw to cut perfect holes in sheet metal. Use some tapping fluid on the teeth of the holesaw before cutting. Leaves cleaner cutouts, and preserves your tools
get a bi-metal holesaw to cut perfect holes in sheet metal. Use some tapping fluid on the teeth of the holesaw before cutting. Leaves cleaner cutouts, and preserves your tools
and to add to that, dont go to home depot and drop $38 on a hole saw if your just going to use it a few times. Pick one up at a harbor freight for way cheaper
ok so i picked up some 540 Cut-off wheels from the local hardware store as well as some Satin Black Krylon. Round 2 of Opration Cold Steel starts tomarrow officaly. I did get some work done today tough.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Overclock.net
27.8M posts
541.2K members
Since 2004
A forum community dedicated to overclocking enthusiasts and testing the limits of computing. Come join the discussion about computing, builds, collections, displays, models, styles, scales, specifications, reviews, accessories, classifieds, and more!