Posts by astrallite

Your speakers should be set to full range in Windows. Suffice to say it's not a very useful question they ask since Windows doesn't have an active x-over system.

Depends what your primary focus is, audio quality or convenience. The majority of the value of components in powered speakers are the amplifier and active EQ/DSP. The majority of the value of passive speakers are in its drivers, for any...

Disable HDMI device in Control Panel.

Quote:Originally Posted by madbrayniak Huh, I missed that. Oh well, the reason I posted it was due to the fact that I wanted to show that you can also get bluray players and such that has good audio processing in them if you wanted...

Quote:Originally Posted by madbrayniak Not sure what burr brown DACs are in this but they are in it: http://shop.panasonic.com/shop/model/DMP-BDT500?t=overview The link you presented clearly show they are PCM5102 DACs with a SNR of...

What about forget the sub and just get a pair of Swan T200bs? They are angled upwards, which is pretty good in a desk setup, also the woofer/tweeter setup is inverted so no woofer reflections off the...

Quote:Originally Posted by chinesekiwi links to these and your settings? Trusty mic: I run Sub EQ first, then My Z11's YPAO. I have a room node at ~30 Hz so even though my subwoofer did -12db (biggest slope its capable of) at...

Quote:Originally Posted by Magical Eskimo And the burr brown DACs are the best, correct? No, the top Burr Brown DAC is the 127db SNR PCM1792, which hasn't been used in any device since 2008 due to cost (about $22/each). The last...

http://www.amazon.com/Duet-Speaker-System-Portable-Music/dp/B0007XU370

Dirt cheap as in what? $10? Anything will do, and quality will all be about the same.