How I can be sure that Im really running my other drives in ACHI when im on RAID0?
Samsung Magican tells me that ACHI Mode is deactivated.
Theres also Aida64 on left, but Im confused about it only saying "ATA Samsung blablabla"
Are you planing to use all of those 700$ to graphic card? Hows your other computer parts?
Build your rig here, so you and we others can see below your posts http://www.overclock.net/lists/component/manage/type/RIG
Quote:Originally Posted by Artikbot I know this is a huge ass necro, but YOU SAVED ME!!
I thought I'd be stuck to filming videos with my Neo V, but the 450D can too!
Thats nice to hear that I helped you
Quote:Originally Posted by KaRLiToS No it's not worth it.
And voltage will be lock at 1.25v (volts), not watts.
tsm106 has a nice guide on how to Overclock your card using a single GPU
The AMD How To Thread
then go check in ...
Quote:Originally Posted by liamstears You could test it by just holding a piece of wire across the resistor to jump it and if it works you know how to fix it and maybe a friend or someone you know could solder it?
If it doesn't...
Quote:Originally Posted by liamstears Yeh this is prob just because you have a v1 with the "bugged" lcd
Have you tried the resistor trick to see if that helps? I know its not for this fault but worth a try right?
If you are not...
Quote:Originally Posted by liamstears I would disagree, I would say something is defo on its way out, what who know and it will most likely just be a screen fault and your fans will still run fine but either way I would contact...
We were talking about fan voltages with my friend and I checked out what Im currently using and found out that I have something wrong with my panel:
It started to flash on right corner and changed color to blue, when it's normally...