Posts by ASSEMbler

Does that give me a decent amount of leeway as far as voltage? It's a crappy board but it supports 125W cpus (but don't try to OC) I am overclocking a 45W cpu so I am hoping (and guessing) I have a good amount of headroom for...

Well I tried another hard drive and windows xp, then vista. I still get massive lag spikes. I tried to install to the added onboard sil controller, it won't even load a cd I added a VIA raid card, and it won't load from a disc, it...

Orleans Athlon 64 4000+ am2 on Msi 785gtm-e45

I am getting real bad latency and stutter in my system. AMD A64 Retro Gamer CPU athlon 64 4000+ RAM 4gb ddr-400 Antec Basiq Series VP450 Motherboard Asus A8N-SLI Deluxe Hard Drive Seagate 150GB count: 2 Graphics gts 250 OS windows xp I...

Hyper 212 There's your problem. It's only two heat pipe cooler.... Get something like antec kuhler or a air cooler.

Someone at the service center dropped it.

This is when I was transferring data over network to my server. Nforce raid hdd issue maybe

C3 and C6 will only really interfere on OC upon suspend/sleep You should have them off anyway. Instead of high cpu volt, try increase mem controller volt a tiny bit if you are using 1.65v ram

I don't use the nforce nic, just wifi. The wifi card is new, put in after the problem, I was using a usb wireless and wanted to see if a hardware card might fix the issue.

Small claims court