Posts by gerrardo

I'll take a spot, please. Thanks!

I like the creativity of hacking 2 cases together, that's awesome! What were the initial 2 cases you fused?

I vaguely remember posting something about being weary over anything primochill says to add to the loop. I'm sure glad you emptied that loop and got all of that out of there!

you would be fine with Mayhem dyes, older dyes had lots of problems, but that concern is valid.

clear tube with uv fluid, or uv tube clear fluid?

Fair point, Skripka. However, I don't know how easy it will be to get that new, fresh batch from retailers, or verify that it is indeed a fresh batch. Did you request specifically? Also, how long have you had the tubing in? Plasticizer...

Quote:Originally Posted by nleksan Could I offer a proposed setup? Tubing: - Primochill Primoflex Pro LRT 1/2ID-3/4OD *if you want colored tubing* ($18 for 10ft) - Tygon Norprene 1/2-3/4 ($38 for 10ft) Fittings: - XSPC G1/4 1/2-3/4...

You could go with a 120 or a 240, depending on space in your case, although I would lean towards a thicker 240. that one card will probably end up around 300watts of TDP, and on air it averaged under heavy heavy load while OC'd around...

I can't wait to see the final product!

you would be ok with either a D5 or a DDC in that case. I've seen some crazy loops done with just a D5, and vice versa. EDIT: don't forget pump tops!