Posts by yamo

I don't have a phanteks but reviews everywhere says its better, even people here on the OCN owners club, as for the CPU the FX-6300 is stronger than a X4 620, more cache and more overclocking headroom (32nm) tech. I'm not saying you...

I feel like when your going the mini ITX path, your looking for low profile and not so much interested in overclocking... I don't think the VRMs are very powerful on ITX... I just used the A8-5600k for a friends family computer, and...

The LV ram is gona be better, the sports can go to 2133 but at looser timings like 10-11-11-28 I know the LV can do 10-10-10-24 @ 2133, and can probably be tweeked further

I've noticed I can run faster memory if I turn down my CPU frequency a little bit, however it for sure showed no gains lol, I just wanted it to boot.

Yeah, I have an older AMD chip too and I think AM3 prefers tighter timings, but these new FM2s like higher DRAM frequency, I'm unsure of the gain amounts tho. I had to bump the CPU back down to 4.0 though because it was causing prime95...

yeah the IMCs suck on these compared to newer chips, but in order to do 1866 I think I had to lower my CPU clock, and I dont think it was really worth it, everything I did usually resuslted in such similar results that it was too hard to...

Hey guys, I couldn't dig up much on the a8-5600k so if anyone was curious here's what I got stable HyperPi runs at Heres the link to the RAM I used, picked it up on a black friday sale:...

Quote:Originally Posted by Sam OCX Deneb IMCs generally have problems with running memory above 900MHz, but 800MHz should be not a problem. Given my experience with various Samsung-based kits (mostly on Intel though), you should be...

Theres my HyperPi results, I guess I'll try again with 1600 and see what sort of times I get, If anything tho, it'll probably be a little slower or the same. Edit: Heres HyperPi results with 1600 7-8-8-20 @ same voltages, ~2%...

Hey guys, so I'm stable at 1333 6-6-6-18 @ 1.5V, seems to be the best I can get it at, I will try some 1600 timings tonight and see if they're any better, does anyone have a reliable benchmarking program to confirm good overclocks? I've...