Posts by Skuloth

What test should i run?

Thanks man It was a fun project to work on, fairly easy beginner mod, but still it was fun

Quote:Originally Posted by dihartnell;14734068 Thats not uncommon. The CPUs rated memory speed is 1333MHz. The motherboards allow you to go higher. Just set timings and speed and volts manually. Yup I already did that. Its set to 7...

You can only use 2 of those 3 ports at any one time. To run 3 displays you need to use at least 1 mini DP otherwise it will not work.

Dont quote me on this haha. But IIRC SR1 are better with lower RPM fans while the GTX rads prefer higher RPM fans. That is mostly a guess, but I think it's a fairly accurate guess. I like low noise and thats why I use the SR1. I also...

I recommend looking into either black ice SR1 series radiators or XSPC RX (better but really thick) or RS (not as good as the RX but also a lot thinner) radiators. EK isn't really known for their rad quality, and they dont perform nearly...

Hello everyone, I just finished rebuilding my rig in it's new home and I thought I would share it with everyone on OCN who has helped me piece together my computer knowledge base over the last year or so As an intro to this build log,...

3 Pin fan connectors can be plugged into 4 pin fan headers, just line up the bracket (for lack of a better word) on the fan plug with the plastic post on the fan header. Look in your motherboard manual as well, it will have a diagram of...

I changed the command rate from 2T to 1T and reran WEI and it's still saying 5.9 instead of the 7.6 it should be saying. When i was in CPUz I looked at the SPD tab and it says the the memory frequency is 667mhz. The sticks are 1600 mhz...

Hello everyone, I just got my rig up and running with a maximus IV gene-z and a 2600k. Before that I was running a 1090t on a crosshair IV formula. Now to the problem. When I ran WEI to set up my new computer and get rid of the stupid...