Posts by EvilMonkeySlayer

Quote: Originally Posted by Trickymonk Thanks for your help EMS. I misspoke earlier and said the default for the Core Enable settings was disabled - it's enabled. I did, however, try to set the 2nd core listed to...

Quote: Originally Posted by Trickymonk Great question, but here's where my lack of experience shows. How do I set it to only try to unlock one core? My bios does have a "Core Manager" selection, but I've only...

Quote: Originally Posted by Trickymonk Thanks, I'll check those settings. I went ahead and flashed the BIOS to the latest and still same result. I tried leaving all defaults and only turning on CPU Unlock, and though it...

Mine unlocked fine to quad, I had to change the voltage settings from auto to manual because of slight instability which was resolved by tweaking the vcpu-nb voltage setting up a tiny bit. Running at stock speed since I have no need...

Quote: Originally Posted by Trickymonk I've read through this thread and the info is great, but I'm still stuck. I have a Gigabyte 870A-UD3 running a AMD Phenom II X2 550BE and using Win7-64. I've made some attempts at...

Hey guys, bought the X2 555. Been playing around and unlocked it to quad, boots into windows fine but I decided to stress test a little.. I ran prime95 and after about 5 passes the machine powered off which I take as an indicator that...

I'm currently mulling buying a X2 555 BE and a Gigabyte board. Am I ok to assume that if it can't unlock to quad core all mobos which support unlocking will allow me to try setting it to tri core? I've noticed that some motherboards...