Posts by jonjryjo

If the keys are anything like those you get from dreamspark, all you have to do is call Microsoft and activate over the phone.

Quote:Originally Posted by mrawesome421 I have two of the same chip. They run hot, so make sure your case has good air flow, and the ambient room temp isn't too awful. I used to sometimes idle a ~40c before I upgrading my case...

Quote:Originally Posted by Alatar yes? 570 was just a respin of the same silicon as well. Same amount of cores as the 480 (just like the 680 -> 770) too. Only that time they actually slapped on a worse cooler, dropped the memory bus...

Hi all, I am just wondering if my temperatures look alright. I added the EX120 and the more powerful pump in hopes of getting a bit lower than this... but I did just increase the core clock by 300 MHz (with no voltage increase from...

In here is my entry http://www.overclock.net/lists/display/view/id/5129260 Thanks!

In. Here's to hoping for the best.

Little update: Everything is assembled and the PC is running great. Temperature under Prime95 maxes out at around 51* C, a 9 degree drop from before.

Attempting to leak test, and the damn pump won't start -_-. Any ideas? I was really hoping to at least leak test this today! I am pretty sure it is getting power, as I am jumping the PSU to start without getting connected to the...

Quote:Originally Posted by PedroC1999 Very nice so far, consider modding the other side panel so it is a bit thicker, and allows for more cable management. Thanks . I thought about that, but I am not sure how I would do it. I...

Motherboard: GPU: Current state that I am leaving it in for tonight: I think it is looking good so far .