Posts by pc-illiterate

and the best cheap fans you can get are yate loons and xspc. next up is swiftech helix and even their 2000rpm yate loon look-a-like. fans under$10 that are proven to work with both higher cfm and static pressure on rads. all the bgears...

sidewinder computers is 1/2 hour drive from me. i wish they had a walk-in store. great company to do business with. they just have strange business hours from what ive read.

Quote:Originally Posted by PedroC1999 How noisy are AP-15's at full load? In comparison to a SP120 @ 1200RPM? hope you have speakers. you might be able to hear for yourself

hammer, i stated long ago in this thread almost exactly that. the carbide series are good cases. if you have a dremel and drill, and aint skeered, these are great foundations for modding. they arent fantastic cases until you break out...

if you can order from somewhere else like frozencpu or dazmode or performance-pc, they sell the same kits cheaper. that particular kit is sold and shipped from frozen it says. personally i would buy this ex360 kit....

keep the psu jumped, run the pump with the all plugs and fittings in and slowly rock your case in every direction and angle you can. youll see more bubbles coming...

are you sure the water is flowing you did jump the psu to bleed your loop didnt you? if you see air in your loop, you should still be bleeding it. i think its a trapped bubble.

Quote:Originally Posted by nagle3092 Yeah the ones connected to the through ports are sagging a tad which has me worried. I cant use any more tubing though with them because it started to kink with anymore. I'm using the alphacool...

rule of thumb is 120 rad space for each component plus a 120 for overhead to good decent temps. 2 gpu plus cpu plus overhead is 480 of rad space. you can get by with a 360 but you'll have high temp issues. in warmer climates, this will...

Quote:Originally Posted by DiGiCiDAL I think you may be confusing a couple of issues... I spent a decent amount of time on their forums as well as reading about them on here when they came out (and with the H100i vs D14 compare) and...