Posts by EasterEEL

With effect from 17.05.2013, the management of Aquatuning has decided to drop all EKWB products from the webshop. In 2007 and following years Aquatuning developed many products for EK Water Blocks under license and technology agreements...

As I posted yesterday 85C is the maximum I am prepared to accept. The GTX580 thermal threshold is 93-97C, after reaching this temp the GPU will dial back the clocks until the temp drops to safe level.

Sidistic Your problem is almost certainly due to the combination of overclock and core voltage i.e. raising core voltage would help. However your temps with vcore at 1088mv indicate you really don't want to go any higher. In order to...

Here are some examples of mine. Background (about 50) cycles daily, insert picture (about 100) every five minutes.

victornor Could do with some info about your set-up. What is your vcore and QPI voltage? You should able to get that up to around 3.85GHz with a multiplier of 25 and a Bclk of 154 with a vcore of 1.2-1.22 and QPI of 1.235 and Uncore...

CPU-z is correctly showing 3843MHz. My concern EasyTune6 is as you can see in the 2nd pic is showing correctly 3843MHz Power On but incorrectly showing 3296Mhz for Target. I want to play with some overclock setting real-time but am...

EasyTune6 B12.1112.1 update recently appeared on the Gigabyte website for X58 motherboards I updated to the new version as there has been quite a few changes since the B11.0823.1 version that came with the X58A-OC motherboard. The new...

Quote:Originally Posted by Hukkie The new firmware does indeed fix the rattling issue, I have an H80i and it barely makes any noise after the update, the difference is incredible. That is good feedback as I had read your comments in...

Quote:Originally Posted by Mr.Pie can you scan that page and upload it here just for the record so we can see? Standard fare. http://www.overclock.net/g/i/1092928/a/792536/sort/display_order

Quote:Originally Posted by Junkboy If their policy is well known to be then, YES If I buy a H100 and CF two PCS 7990's @ 1k each I fully well expect Corsair to pay for both if this is their policy. I'm not saying they didn't need to...