Posts by Sin0822

Quote:Originally Posted by adamlee05 if what my page is showing is correct, you were 8 minutes late! No more faith in you, you have disappointed me Sin. JK great work Steve! I'm sure its going to be greatly appreciated!! Thx...

Quote:Originally Posted by TehOnlyMITTENS How is that TME II treating you? I have one, but I don't have the 1156 brackets. I don't know if I want to drop $600 on a water loop or just ask Spire for a backplate.The Thermlright Eclipse...

yea i bet there might have been a RAID firmware upgrade perhaps

yea prime95 makes your temps shoot really high and that can easily cause instability.

Quote:Originally Posted by ohhgourami I just use 1.9 or 2.0 VRIN like you recommend and many times it will just fail to boot. I have my LLC on extreme. Here are my settings (F5 BIOS): 45x multi 42x uncore 1.34V vcore auto...

BTW here is the commentary and ranges from TeamAU: 1v CRAZY (TeamAU code: OPA) 1.1v average (TeamAU code: OK) 1.2v go kill someone (TeamAU code: JUNK, pull out the 9V battery!) Make sure you load optimized defaults, if you want to not...

thanks man, Dino asked me to add in some VID ranges with TeamAU commentary lol Then just leave VIN on auto, it should be fine. What non-auto VIN are you setting anyways? I find that increasing the VIN has helped others and me a little...

red one next to the 24 pin is the POST Code disaplay, you can use electrical tape or gorilla tape and cover it up. None of the non Green LEds can be shut off unless the power is off(even then the power button gets lED power)

Quote:Originally Posted by kiwaczek Mate i do understand to beta Bios is beta I have been try share my experience with this bios. Anyway at least for me F5N dont fix XMP issues with my Corsair kit (CMT16GX3M4X2133C9) , its made it...

Quote:Originally Posted by sabishiihito What BIOS for the OC series has those extra memory profiles past the PSC one? And speaking of the profiles, is there any trick to getting them to boot when set? I haven't been able to use...