Posts by Flawless_45

Quote: Originally Posted by skatingrocker17 I wouldn't plan on playing Xbox Live on a 3g connection though. At my sisters house she has 1Mbps Verizon DSL and I have 4 bars there on my Droid and I get ~2Mbps down on...

Ok, well somehow I got this to work right. My router is still blinking an amber light (no network connection), but it's working, and that's all that matters I suppose.

Quote: Originally Posted by kennymester You can't access the router from the wan plug unless you have enabled it in the router settings. Essentially your router is looking at your pc right now as a modem and it wants...

Quote: Originally Posted by _02 Plug into it using a wire with your PC. Usually you can access via ip in your web browser. 192.168.1.1 or 192.168.0.1 I have tried doing this, when I connect the router...

Quote: Originally Posted by beers Here's a rigged way of doing it. Enable Internet Connection Sharing between your tether network interface and your ethernet network interface. Set up the router to obtain WAN IP...

I've been looking for this everywhere but can't seem to find any solid info. Currently the only internet connection I have is from a 3G network tethered from my Blackberry phone to my PC with a program called Tether (imagine that)....

Quote: Originally Posted by Messenjah If you tighten it to must it will get a little wobbly. try loosing it a little and see if that helps. I ask about it in the past in post. I didn't have any trouble with mine...

Quote: Originally Posted by Mr.Pie yes its normal I advise you loosen the tension a bit...there has been unconfirmed reports that tightning to the max is above intel's spec therefore damagin the...

I had a quick question for anyone with a Thermalright Venomous X Black CPU cooler (or anyone who has experience with one). I installed the backplates and everything correctly, I put the CPU and pressure bracket on, tightened the...

Hello everyone, new guy here, just had a few questions. Also, i'm at work so I haven't had time to read every single post, I hope this hasn't already been answered. First off, I'm about to start my first PC build, so i'm a little...