Posts by MrPerforations

hello, did you do a fresh install of windows when you changed your cpu please? couple of bits to look at, does the windows task manager have 6 threads showing please? go to run and start, and then type msconfig, open msconfig boot and...

please you need to upgrade your cooling before doing the oc mentioned above, i don't know about the 4100, but the stock cooler on the 8120 even with lower voltages is not up to the job, the increased work of the cpu speed though...

hello, are you stock cooling please? list of guides to follow here, http://www.overclock.net/t/226939/amd-cpus-current-tech-essentials-older-tech-link-included please read a guide to understand how your bios setting work. I like...

hello forum, I have been looking at a water cooling kit for my case, the current h100 I have don't fit my case right as mines a 280mm rad fitting case and not 240mm like the h100. so have I got the right kit... XSPC X2O 750 L/ph 12V...

hello, main quiz for you is does that mobo have cpu load line calibration please? if not , it will work, but ocing it might just vdroop though the floor and be unable to do the job.

hello, try this as your monitor ...http://www.cpuid.com/softwares/hwmonitor.html

so glad we could help....

hello all, are the bios up to date on those mobo's mentioned please?, just I thought it was an error where It was thinking it was a phenom chip, the 990fx is a surprise as it was made for the fx? either way the m5a99x does not do this,...

Quote:Originally Posted by edalbkrad With decent cooling, he'll be safe to overclock up to 3.4 Ghz, which is the stock speed for an Athlon II X3 460. I suggest he just keep it stock and just unlock the fourth core, more beneficial...

I would take the M5a99x evo, its more up to date than the biostar, and the biostar does have a good rep too.