Posts by Hokies83

MC still has this deal!

I want to find a nice cheap Raystorm kit.. Id just sell the cpu block cause my folding systems cpus run stock... but get some Uni gpu blocks / heatsinks for gpus.

U want it right before WBS or u will never get the air out. And right or near after to assist in this.. they are by far the most retrictive thing.. A rad just needs a little pressure WBS need Flow / pressure So keeping the pumps right...

Up7 was late to the show... but has over took Asus in plenty of the important benches. Think if they used the same chip in the u-7 as they did those ME boards...

But you did see that Gigabyte has the lowest RMA's and sell the most boards... You know what that tells u who makes the better board

NP 2 MCP 35X is what is used in my loop 2 do the job fine. Try to have a Pump right before the WBs and right after or near right after.

When i was gaming i ran 1200mhz x3 and 1500 mhz ram x3 But then my top card started dying on me and went from being stable at 1225mhz to 1060mhz then death lol. Quote:Originally Posted by rdr09 i ran mine both at stock clocks but i...

Um yah i can be picky It is retarded using 2 different colors of blue on a board.. Why can they not use just the dark blue.. it looks great.. the baby blue is ugly. It says Asus on it so it is prolly 25% over priced.

You need 2 of this one http://www.sidewindercomputers.com/swmc12vdcpu1.html or 2 of this one. http://www.sidewindercomputers.com/kopd5stpu13.html

I think the board is ugly it would have looked fine with the dark blue but the baby blue ruins it.