Posts by Lucky 23

Auto is the worst option for overclocking. Follow the guide using offset and additional turbo voltage. Getting BSOD's is just a part of overclocking, its going to happen As i said if you are going to stay with a 40 multi then you will...

You never want to overclock on auto voltage. You will want to set the correct voltage for you specific overclock. With a 40 multi you will most likely running a high negative offset. Which CPU do you have?

The extreme 3 gen 3 is a great board. I'm loving mine You should watch this thread also http://www.overclock.net/t/1198504/complete-overclocking-guide-sandy-bridge-ivy-bridge-asrock-edition

Quote:Originally Posted by Azraelus66 I've ran prime95 for an hour and a half which should be good for normal use according to the guide, however my games seem to crash 15 minute to an hour inside the game. Event viewer shows 2...

Quote:Originally Posted by Kokumotsu Yeah it wasn't stable :::)) 101 error, added more offset In general what does it usually take to get 4.5 stable I should probably get some bios screens for you to look at TC Did you get the BSOD...

x2 on p95

Quote:Originally Posted by Conners  Hey yeah thanks! Didn't really want the whole I/O panel but it's cheap enough... Thanks again! +1 Thank you

Quote:Originally Posted by TwistedTime Just giving an update on my overclocking. I have 4.5ghz with temps(ambient temp around 25C) usually around 80 with spikes going to near 90. With offset at .005 and turbo at .020(tho I think it...

If your havent delided your CPU then you may not be able to clock it that high. Personally i wouldn't push it passed 90c

Did you add more offset or turbo. If your are not having issues at idle or light load such as opening your browser, surfin the web then you shouldn't need to increase your offset.