Posts by lagittaja

Wonder if anyone here has any experience with the Samson Rubicon R10S? http://www.samsontech.com/samson/products/studio-monitors/rubicon-monitors/r10s/ A discontinued model already but would only be 211€ delivered from Thomann.

P95 small FFT's 73-79-77-75, IBT v2.54 with 4096mb load 73-80-78-76 ooh .75*C difference on average P.S. 4.5Ghz ~1.22v P.P.S. Linpack on Ivy is pointless anyway.

SynchronicBoost umm no, not true with the latest Prime95's. It is true if you use 27.6 or earlier. But with 27.7 or newer the temps will be almost identical with IBT or Linx because of addition of AVX to P95.

According to Idontcare's tests @Anandtech forums it's often the distance between the IHS and the die.

Haha, yeah I do sometimes. I'll continue testing the lowest voltage for 4.8Ghz sometime later. Was too tired yesterday but anyway, internal PLL OV was disabled so that probably was the problem.

Manual of course. I hate offset. E: Oh and I don't really need to check it with a DMM, I'm just interested. What CPU-Z/my mb usually show as my vcore it's usually only off by -0.4% at most, IIRC. E2: What? No I haven't even got down to...

If you really think HT will benefit you then by all means go for it! By the way, I'm right now testing my 3770K at 4.8Ghz, trying to find the lowest voltage I can run it at. Started at around 1.36, down to 1.33ish now, I'll check it...

If I didn't have my current rig I still doubt whether or not I'd pick a FX-8350 and so on. At least stock FX-8350 is still slower in Handbrake vs 3770K stock. Wonder if there's any FX-8350 reviews with overclocked comparison.. And that's...

Well here's my HTPC with it's new parts, been up and running now since friday. Got everything sorted properly

http://www.overclock.net/t/1016941/the-official-noctua-club/960_20#post_19959020 At least from there.