Posts by UNOE

I can max out my AX1200 with three 7970's around 1332mv with 1325mhz core clock 1700 memory clock. - it draws about 1325 watts from the wall. Anything under that is pretty stable, but yeah with 4 GPU's you need more power. This is why I...

Quote:Originally Posted by AirWick  You planning to fix the light bleed? I tried doing the tape around the metal frame for my light bleed but it didn't help. Did you overlap the tape so part of it is sticking to screen edge. Or...

Quote:Originally Posted by finalheaven Hmm.. I have gotten a tracking number in less than an hour from my order.. not sure if that's a good or a bad thing Seems some shippers don't ship every day. Some sellers wait a few days to...

Quote:Originally Posted by OneGun Depends where you are at i guess..It looks like they go to the DSL hub in OHIO.At least my paperwork is there.Its weird it says my monitor is in OHIO but i called and they said it is not even in the...

Quote:Originally Posted by tsm106 That's probably an end user issue, bad bridges, etc? Its coincidence that you can connect two bridges in two card setups because you cant do that with three card or four card setups. Fyi, I'm using...

Quote:Originally Posted by tsm106 Crossfire only requires one bridge. It's not like Nvidia where you need to cover all the fingers. Two cards are working better with two bridges at 1440p 120hz than only one bridge. Dirt 3 won't...

these guys on this 1440p @120hz thread are saying that you need two crossfire bridges. I'm a skeptic, but I seem to be seeing a difference from one bridge vs. two bridges. does anyone know if I can do three bridges with trifire ?

Oddly enough I identified why I could not overclock as high with my 7970's. I thought it was because I opened the panel up. But it seems its because I started using some of the color profiles in the OP. Before I was using my own color...

Quote:Originally Posted by nimski Okay so I managed to fix my monitor without using any tape. Turns out the clips that bolt the display to the frame were on too tight. I loosed all the bottom ones and the ones on the side and it...

Quote:Originally Posted by UNOE Here is a mini update on opening the panel up. I was able to fix my backlight bleed completely and it was really bad. I put a wad of electrical tap under the panel in one corner (bottom left) and the...