Posts by blkdoutgsxr

I guess I was under the impression, though it is very well the case its because I don't know a whole lot, that burst was a good way for am. photographers to capture 'the moment' more frequently. I've used it on nicer cameras when things...

Everything that I have read comparing the d5100 and d5200 says that there is no real 'huge' upgrade from one to the other. There is a 25% increase in frames/sec in burst mode, but the extra megapixels is not really a real world gain from...

What started my wanting a new camera was I took it out to shoot my buddy doing some snowboard tricks and was pretty disappointed in the FPS burst mode was able to achieve. I know the 5100 doesn't have a really fast burst mode but its...

I don't know if this is very common, but a friend of mine went around to a couple bars and tattoo shops and brought some pictures they took with them and asked if they could hang them up with a price on them. A couple places let him and...

Hello everyone, I am getting back into photography and thought that I would inquire on here and try to get some opinions. I have been reading around the internet and have narrowed my choices a bit but would like further input. If you...

Quote:Originally Posted by MainStageNews I have seen that messing with the voltage can help so I may try this. One thing that I am wondering is can I have a game main menu up so the card is making the noise and on my other screen...

I'm not sure if this will cure your coil whine, but mine only had it at a specific voltage, when I bumped/reduced the voltage ever so slightly it went away. You could try this out first since it is easy and doesn't require a tear down.

Boxxy

I'm not trying to be a buzzkill or anything, but its just not possible. Your CPU can not be below ambient when running water/air. Your load temps are a little lower then your idle temps should be reading. The only reason I bring it up is...

It's just going to be based on the chip. My 965 wouldn't go above 4.0. Your temp readouts are not correct though if they are showing 1-2 above ambient when running Prime or some other stress testing utility. What are you using to pull...