Posts by kosmok1000

PSU is new and is 1200W the video card is use but is of another computer I have tried to flash and switching the bios.

just flash the bios same result.

this is with the power on

as soon I press the power bottom and no bios at all

trying to start the system for the first time, no video, code on the MB is 00 please help. already did this. Remove all the hardware. CPU everything just have the bare board. Use the box it came in and put your motherboard on the...

did all that and still code 00, can any body help?

thank you.

trying to start the system for the first time, no video, code on the MB is 00 please help.

because I going to use Koolance cuick disconnect so the MB tray can be removed easily, and is not enough space I tried. thank you for your input

I would like your comments please. Should I make two separated loops since I have two pumps on the Koolance 450X2 reservoir, or one loop and go from the CPU to GPU'S? the way I have now it is reservoir/pumps to two 480 rads to CPU from...