Posts by bluetroll

i put the Twin Turbo Pro on the Sapphire. Its worth the $30 upgrade. You get RAM heatsinks too. The VRM heatsinks need to be modded though. You'll need to cut them into smaller sizes.

I just picked up a Twin Turbo Pro for my Sapphire 6850. The card is around 5c cooler at idle and 10c cooler on full load. It is also way quieter than the stock Sapphire fan. On full load I would need to run the fan quiet high to keep...

Thanks for you input guys. I just picked up an Arctic Cooling Twin Turbo Pro. It fits great. The only issue was with the VRM heatsinks. I had to hack the VRM heatsinks into smaller sizes (about 3 fins each). I couldn't just throw...

I can't get the memory to clock anything higher than 1115MHz. The highest that any of the GPU Temp 1, 2, 3 get 60c. So do I need the memory heatsinks?

well here are the temps gpu 1: 59c gpu 2: 58c gpu 3: 63c is it overheating?

I use Sapphire Trixx and in the Windows 7 gadget it monitors the following: GPU Temperature GPU Temp #1 GPU Temp #2 GPU Temp #3 VReg Temp VReg Temp Not sure what GPU Temp 1-3 measure? Eyelegal, what software should I use to monitor...

FYI, Sapphire 6850 doesn't have any RAM heatsinks. There is a big VRM Heatsink tho. I'm going to pick up some Enzotech BCC9 RAM heatsinks in the next week or 2. I will post up photos and mods required to make it fit.

is there a way to check if the RAM is overheating? I can't touch them, they are covered by the fan.

I've got a Sapphire 6850. I'm running it at stock volts OC'd core clock to 925MHz memory clock to 1100MHz ( I'd like to get it higher) If I try to boost it over 1100, it artifacts. I'm assuming the RAM is overheating. Will the...