Posts by Sp33d Junki3

Quote:Originally Posted by GioV Here is my updated rig Looks nice and clean. I see in other post you had, the temps was lower. Which is still better. What you can try is to have a bit more exhaust. Take the H220 go with exhaust and...

Quote:Originally Posted by jderbs Okay, thanks. Are you saying my GT AP-15s are a waste and I should use something quieter like the Corsair SP120?SP120 is not quiet compared to AP15, the noise at full speed is loud and the hum from...

Quote:Originally Posted by jderbs Check out my temps... any reason for such inconsistency? Core 1 and 2 are 16-17 degrees cooler than core 4. Does this mean I don't have a good TIM spread or is this just expected with a 6 core...

Quote:Originally Posted by Ryld Baenre  Is it known whether or not this will fit the EVGA 4 Gb models? or just the stock models? I've been looking at the alphacool copper blocks that work with the 4 Gb model to add to the loop when...

Quote:Originally Posted by El Media Vida Hi guys, what universal GPU block do you recommend? - XSPC Raystorm - Watercool Heatkiller GPU-X3 LC - EK Supremacy - EK Supremacy bridge edition - Swiftech MCW82 The card it's a reference...

Quote:Originally Posted by Brennan Hodges what is a good rpm to run pump at where it wont effect performance? i have it down to ~2000 and temps havnt changed from 100%. just wanted to know if i could run it lower wit good tempsI...

Quote:Originally Posted by Phishy714 I have been hearing everywhere that the push/pull fans should be the exact same for the rads? I take it this is because the fans will push/pull the same amount of air at the same speeds -...

Quote:Originally Posted by Nilsom Swiftech H220 can handle the two titans with good temps I want to block the titans but I am very fear, never done this before I already have Swiftech H220 thanks to allIf you 2x titan, then you...

Quote:Originally Posted by gdubc I used a dremel to attach the kraken in the front of mine and i can still pop the front open enough to remove and clean the dust filter. Took me literally five minutes.Dust filter dont affect rad...

Quote:Originally Posted by Brennan Hodges 21 ambient, im a noob so i will assume you mean what kind of bios so MSI UEFI click bios 2. i have xmp on and vcore to 1.255 with 45 multi. thats all i have touched in bios. system temp is...