Posts by Sp33d Junki3

Quote:Originally Posted by Mattb2e I have those brackets, and thats what the H220 is installed to, the problem is there are gaps If you mount the brackets like the picture you show, you cannot install the mesh screen that goes over...

Quote:Originally Posted by Skullwipe I had a trickle sound for a couple of hours, gave the hoses a few flicks with my index finger and that was that. Added about 1cc of distilled to top it off and it's been running flawlessly since...

Quote:Originally Posted by Ardi I followed the youtube video, posted somewhere here on this thread, on how to flush the system to the tee using HydrX PM 2 Coolant. I think the loud whooshing sound caused by the trapped air was...

Quote:Originally Posted by Mattb2e The issue with that is that the fan openings at the top of my case are designed for 2 200mm fans (or 230mm, cant remember). So with this said, I would have a gap between the 120mm fan mounts, as...

Quote:Originally Posted by Ardi I bought mine from Microcenter on Friday. The pump was very loud because of trapped air bubbles. After flushing and bleeding the system, the pump started making a clicking sound. I just got...

XSPC http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=RJVsfwZg&searchspec=XSPC+120+gasket&go.x=0&go.y=0 Phobya http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=RJVsfwZg&searchspec=...

Quote:Originally Posted by edelfurioso Quote:Originally Posted by VulgarDisplay88 3mm. Replaced my blue one with a red one.can i get a link from were u got the red one?You can buy then on ebay

Quote:Originally Posted by gdubc I know the stats aren't what they say I don't know of many fans that are. But I do know running full blast they seem to pushe as much air through my radiator that the Corsair sp120s do and they run...

Double post error.

Quote:Originally Posted by Mattb2e Ok, this seems to be the answer I was looking for, you and Sp33d Junki3 seem to have the same answer, and it seems like a realistic one at that. Rather than waste time with uninstalling and...