Posts by elchucko

Thank you! This 2600k is giving me fits because I'm trying to get it stable at the lowest volts possible and right now I'm adjust one setting at a time and stressing. So far no joy during the stress testing.

So is the comp toast until the stats get fixed? Sorry I have been away for so long. I've been very busy the last few months. I got married on May 4th and the weeks and months leading up to it were very busy. My rig was in pieces up...

Thought I would throw my hat in the ring. Rig Builder (My Ultimate Rig) Total cost ~$3,500.

First let me apologize for not updating this thread sooner. The rig I have been using for testing and development has been down for two months and I have been unable to pull any of my kernels or continue development. Once I get it going...

Hey team sorry that I have been such a no show for a while. I've been insanely busy with work and school. With sequestation hitting I've had my Tuition Assistance cut and had to sign up for my last four classes in order to get them paid...

Quote:Originally Posted by u3b3rg33k You could screw the 220V stuff and run a 12V compressor like I posted before - they may not be scroll, but they are speed controllable - that, coupled with a 1500W ATX PSU would have you set for...

Quote:Originally Posted by u3b3rg33k what are the specs on your current phase system again? Most of the pre-fab cascade system's I've seen (like the ones I linked to previously) have minimal capacity. I assume you're going full...

Quote:Originally Posted by u3b3rg33k chucko, have you given thought to putting a TEC under your phase? it's another form of cascade, and you don't have to buy any extra gasses, assuming you have enough chiller capacity for the...

I started looking into gases today to build my own AutoCascade for the rig. It would keep a CPU much cooler at a much higher load. However the gases alone are going to cost me close to $900. So my question is would anyone be interested...

Quote:Originally Posted by arvidab Nice, I'm running my 560Ti@1000MHz again and it shows 27k on a 8072, so I think I wasn't at 980MHz from my previous numbers, maybe just stock clocks. I'm excited to get my server MB back on...