Posts by madness777

You can safely go to +150mv on the core. Your temp must not go over 80°C if you want decent clocks! You should be aiming around 900-950MHz, depending on your card. Good luck!

I'm laughing my arse off xD

Satisfied? =] This is the simplest way I can explain VID. This is how I made it:

It's a Gainward 8800GT. Mapping? What do you mean? xD

I hope I didn't miss anything... TBH, she doesn't need a vMod...

(Right click and view for giant pic) Figured out the mods myself =] OCP, OVP, vCore with VID selection (1v, 1.1v, 1.45v, 1.55v [load voltage goes up to 1.64v]), added caps and stronger inductors!

I didn't notice a difference with AUX when I was clocking it. You're not rising anything with AUX. @b0undyfr0: Maybe it's crashing due to the temps. I saw my card crash at 77°C but 76°C was completely stable =] Same when I was...

And the fanspeed? At those temps, fanspeed should be 50%

How about thermal paste, both of you?

Quote:Originally Posted by pewpewlazer Not quite sure how you're "losing money" by overclocking When you're overclocking, you're getting free performance but at a greater cost, your electricity bill is higher, your GPU wear is...