Posts by LilScrappyD

Quote:Originally Posted by OverSightX Heres another version in a new case for me. What you guys think? My Note2 really nice man! thats a 10/10 but if it were me i would route the gpu cables to the grommet on the right. also, i...

Quote:Originally Posted by Tabinhu Really nice I would say 9.5/10 Love the way you kept those SATA cables clean, although using alot of them. The only thing you can improve is getting those cables sleeved. By the way, why are you...

Quote:Originally Posted by redleader1138  that's an easy 10/10 although if it were me id tighten the cables up a bit. the rig screams streamline so id think it would look better with clean flowing cables. also, + rep on your...

What BradleyW mentioned just make sure you get high quality ones or else they will fall off, especially since all of their weight will be pulling down away from the VRAM. You could also use thermal adhesive but it would be a rather...

woops k lets get a mod to close the thread.

http://compare.ebay.com/like/290768541264?var=lv<yp=AllFixedPriceItemTypes&var=sbar&_lwgsi=y&cbt=y&bigimg=y Great chip for low end budget builds or HTPC's. at $35 shipped this is a steal I got one for my mom's HTPC for $50 bucks a few...

Quote:Originally Posted by imolate I hav my cpu sitting at 4.7ghz with 1.28v , so I should turn it off? I did turn it off earlier but the only difference I noticed is it allowed my cpu to idle at 1.6? atm it just sits at a 24/7...

Quote:Originally Posted by REPUBLICOFGAMER get this bad boy lot of hard drive sata's power everything u need!!!!! http://www.newegg.com/Product/Product.aspx?Item=N82E16813157284 and for the cpu i suggest any enclosed cpu water...

Quote:Originally Posted by imolate its the 3570k with a p8z77 v-lxif you dislike this drop in voltage, increase your load line calibration to the maximum. It should stay at a lower idle voltage and increase a little under load. on...

highest 24/7 OC was my i5 3570K @ 4.5Ghz 1.28v