Posts by Its_me

Quote:Originally Posted by myktek;13044335 tried tonight and it just crashes the program on Win7 64-bit I run win7 64bit too, i think you must have edited the wrong address m8.

Ok thanks, does the overclock scaling and volts seem descriptive of the Hynix 30nm ? And any advice on how to get this running tighter then cas10

NP m8 Uploaded with ImageShack.us

Same trouble as I was having originaly That's reason why I popped the spreader off, just so little info. Maybe someone will recognise the codes on XS, ty for help

Its PC3_12800_8GBXL 9,9,9,24 @1.5v Hates volts, increasing Vdimm decrease the stability of clocks. Managed to get 1850 out of it @ 10,9,9,28 @ 1.5v but when increasing the Vdim it starts to fail memtest very rapidly.(test5 seems to...

Can anyone recognise this memory pls. I googled the code, but nothing comes up. Its on Gskill 8GBXL. thanks!

Quote:Originally Posted by Telnet;13020942 For 2.02 change byte 191431 ($2ebc7) from 16h to 17h. I haven't tested this though as I don't have access to my Kingston drive right now. Your a star Telnet, that works m8

well that exe is from win7 64bit install, so that should fix the issue for you maybe.

All sorted ty - if anyone need this a link in the Kingston 40GB SSDnow thread.

Ok just incase your having issues, i have uploaded my modified exe for use after the v2.01 install (just copy/replace in the Intel SSD toolbox folder) http://www.megaupload.com/?d=S39MVPY6