Posts by longroadtrip

The bowing out was fairly noticeable...This worked out perfect though... In this photo you can see the RAM bowing out a bit... After...It's nice and straight... Today I worked a bit on the prototype bracket that will hold the 3.5"...

yes..blue and white are the only colors I've seen so far, but I have heard rumors of red as well...

GTX 780 has a maximum consumption of 268W..add that with the rest of your system and you are looking at about 400W peak on your PSU..you'll be fine.

subbity sub sub!

Just a quickie update...The nice thing about the Dominator Platinum RAM is the light bars can be changed out... It comes in a nice little kit and I am going to stay with the white, but I like the look of the add on light bar. Stock...

Thanks for the compliment! I use the Alphacool XT45 rads...I find it to be a decent performer and a fair compromise size-wize...I don't do a lot of OCing, but like to put a bit of overhead in for when I do feel like playing a bit. My...

rule of thumb for watercooling is..1 120mm rad per block being cooled + 1 more 120mm. If OCing, you will need to add more rad space based on how much OCing you are doing. In my Yin build, I am cooling a 6970 and a 3770k...I went with a...

Quote:Originally Posted by cr4p Here's my prodigy Nicely done! Looking forward to seeing what you do with the side panel Quote:Originally Posted by ratzofftoya So, if I do a Baby Beluga/Singularity-type mod and put a 280...

I really appreciate it dman... To be honest, I haven't really done any mods to the case aside from drilling a couple holes for a fill port and LED...Even the HDD setup I am going to be using doesn't really require any case modding, just...

I was able to get a 3.5" to 2.5" Hot swap bay in there, but it required modding the bracket. If memory serves, (I don't quite remember the measurements as it was several months ago) it was about 3-4mm too short to be able to get a...