Posts by inVain

^ I like the heatsinks on the top of your nidec, what are they?

don't use resistor, use at least an LM7812 instead. just like your attenuator (or pot) on your pre-amp, the output voltage of the resistor may vary as you change your fan. since the impedance may vary for each fans

my ueber fans and yes, I put them on duty

I mixed Delta, Denki, PAPST, and Adda inside my Cooler Master Case and never feel guilty and even when you stick to a single brand for your case fans, your PSU fan might differ by itself, me think

Quote:Originally Posted by Jump3r How about when 1500W isnt enough? You just use a 1000W strider and run the 1500 Strider though the door to power the GPU's (ohh wait i threw away the door) And yes that is a Thermaltake 6000...

Quote:Originally Posted by jokrik I'm using rotary tool, with fibre enhanced cutting disc, they sell it in ACE I didnt cut it straight on the line , leave a bit of gap and just use a rotary sander to make it perfect else I'll have...

Quote:Originally Posted by jokrik March 11th 2013 Got the last part of the build done Window panel has been cut down, and bought some glass (Yes! no Plexi!) I'm avoiding the cloudiness which plexi can be holly molly how on...

Quote:Originally Posted by freitz  [[SPOILER]] Wow that sneak peak looks great!affirmative, it looks so dang clean this build has made me dying to rebuild mine

Quote:Originally Posted by jokrik 1st of March 2013 A pretty good update! I've received the soldered LED and the fixed pump from InVain, very good job! he got it right, well done sir! I've tested the pump straight away And...

no problem, just bring it on I really hope the internal circuitry were undamaged