Posts by PoWn3d_0704

Hi, I am on a GTX 670 with three HP w2207 monitors attached, each at 1680x1050. Here is my issue. I have three monitors. With all three plugged in, I get the error 'Input Signal out of Range' on the middle monitor, while the other two...

Yeah, It is set to 20%

Sorry. It's 5:30 am and I've been up all night. Like I said, in HWinfo32 I have... well, here.

I promise there is no VRAM in HWinfo32. I don't know what that is about. And I am in the sensor part. (All night LAN party....)

You guys think that the 11.8 volts on his 12v rail might be the issue? He has a Corsair TX650. We are using MSI AfterBurner, but CCC Confirms the temps and Core Clock flux. He has the Sapphire HD7950 LINK EDIT: We cannot get any...

Yeah, D/Ling and checking now. We'll probably throw on some high quality Thermal Paste if the high temps become an issue.

Yeah, he is running 12.11, and he is installing the CAP now. (I don't know what that is... but he does, so oh well.) We are running identical, yeah. I OCed him to +20% and a core clock of 1Ghz right off the bat. His core temps in...

While running benchmarks and games (Haven, FurMark, Hitman, etc) My friends GPU is flipping back and forth between 100% usage and 63% usage constantly. His clock speeds are doing the same thing, across multiple drivers. Anyone know what...

Well, I can hold 65-75 FPS ultra with one 670. SLIed, I was doing 70 FPS on three monitors at a resolution of 5400x1050. And that's on AMD. Sent from my HTC Rezound using Tapatalk 2

Twin frozr all the way. Unless Gigabyte kicks out a 660Ti Windforce x3. I have the Windforce 670... 60% fan speed (58C in Haven) and quieter than my old GTX 560 at an idle. Sent from my HTC Rezound using Tapatalk 2