Posts by MaFi0s0

I just updated my RST software and drivers can someone tell me if these settings are correct, I have 2 520s in raid 0. [[SPOILER]]

Thats normal, one or 2 cores will always be much hotter. The difference becomes smaller the higher the temps go.

Those are good temps.

Good news, on Z77 platform and intel RAID atleast, ports dont have to be correct for RAID, got all the ports mixed up and its working fine.

The CPU die dented my waterblock! and I am getting qcode 55 again. So only DIMM slot 3 works. stress testing now 4.4 @ 1.2v 53c

Just to wrap up my OCing. CPU PLL made no difference except when raising BCLK 1.55v was not enough for 103BCLK. Internal PLL I did not need =< 5GHz. VCCSA, PCH both did SFA except corrupt a temporary file on my SSD which chkdsk...

120.3 120.1 140.1 GPU and CPU in same loop. Water temp is roughly ambient + 9c while stress testing CPU.

Quote:Originally Posted by DaClownie Mafioso... yea. he didn't just see SOME degradation though... he kept stress testing his chip at 1.55-1.6, and it got to the point where it wouldn't even boot at 4.4 w/ 1.3 volts anymore. LOL I'm...

Quote:Originally Posted by homestyle no, don't do that. some people do that, but some people also steal. doesn't make it right. doing it is like the most dbag thing you could do in life. Not coming from a robin hood rationale here...

.