Posts by lin2dev

Compaq PIII

There's DCS. Admittedly DCS doesn't have any fighters yet (Flaming Cliffs 3 doesn't count) but the MiG-21 and Huey are releasing VERY soon and Eagle Dynamics has said they're working on a F/A-18C and F-15C a few third party developers...

I have a Cyborg V.5 it's pretty much a piece of aluminum with some sort of plastic coating on top so it won't tear up your mouse. I don't remember the exact price but it was ~$20

Good thing my computer only costs $0.11/hr to run (and good thing I'm not paying the electric bill )

Where did you get your printed parts? The Z motor bracket and the pulleys for the Z axis are unfamiliar to me, for the nut on the big extruder gear, something to keep the nuts from turning is a good idea, nylon lock nuts, tension nuts,...

That would probably work if you can turn the pwm from the normal pump into a voltage you could then feed that directly into the fan controller to supplement the primary pump or have it trigger a threshold above/below a voltage Sent from...

If you don't mind getting into some minor electrical engineering then designing and building a basic circuit to do it should be simple iirc low pass wave filters should be a start Sent from my Galaxy Nexus using Tapatalk 2

Quote:Originally Posted by jprovido DIY guns? scary Not really, PLA or ABS (or any other thermoplastic) can't withstand the stress put on the receiver during firing, the only reason why this (sorta) worked is because the AR15's...

To my knowledge Visual Studio doesn't support writing assembly. You'll probably have to download an assembler, I use Yasm.

Quote:Originally Posted by IvantheDugtrio I don't think Intel can drop socket CPU's for their enthusiast/server market. It just wouldn't make sense. It would however make the most sense to do this for all of their mobile CPU's as...