Posts by Reworker

Well it seems that the Eisberg is finally available to order from the CM EU store:- http://www.cmstore.eu/cooling/cpu-cooling/eisberg/ Let us hope that widespread retail availability will follow. Not sure why CM didn't communicate this...

I think the Z and Zx probably have the same PCB, but this is just an educated guess as I haven't been able to find a shot of the actual Zx board without the red aluminium cover. This is the thread at [H], but there is some confusion...

I hope this sees retail availability soon, as Coolermaster showed their Eisberg system of modular liquid coolers as far back as last March, but to my knowledge there has been no retail release. These modular liquid coolers offer the...

Quote:Originally Posted by zinfinion The weird thing is the Creative press release says "The Sound Blaster Zx incorporates all the hardware and software features of the Sound Blaster ZxR except for the DBpro daughter board." Yet as...

The Sound Blaster Zx is the same card as the Sound Blaster Z but the Zx has the external audio control module. The Zxr is a slightly different card, with 6.4mm jacks plus the external audio control module and daughter board. The Zxr is...

Looks like that whenever it is available in the retail channel, it will have been worth the wait. Very much looking forward to the full, official presentation. Thanks George.

Quote:Originally Posted by Swolern OK Origin is back up and fixed Noticed this just after installing the new Nvidia drivers; couldn't get Origin into "online mode" and kept getting warning messages that my "credentials had...

There is also this thread on the GTX660 Vs HD7850/7870:- http://www.overclock.net/t/1330176/geforce-gtx-660-or-radeon-hd-7850 The impact of the 12.11 drivers is discussed.

I would think that the Nvidia GTX660 2GB is the closest rival for the HD7850 2GB. The HD7850 is certainly a more powerful card than the GTX650Ti, but it can't match the GTX660Ti. Hence the closest Nvidia GPU would be the GTX660 (non...

The Asus P8Z77-V Premium would be a good choice as you could use slots 1 & 4 in the way you have suggested, and there would be sufficient space to allow for cooling. The P8Z77-I is a mITX board so I'm assuming that's a typo and you...