Posts by Drewmeister

It's coming along very nicely c-s! What's wrong with your solenoid? It only needs 1 ton rating.. pilot type are best. I see you routed suction line up off of hx and then nice "u" bend. You could try without solenoid first and see what...

Hey Ron, looking really good there.. great info too! Any Updates?

It looks like you have this all worked out pretty good. Hopefully you can find a cheap dual port recovery bottle with the larger 1/2" ftgs. The recovery bottles have a dip tube on the highside so no need to turn bottle upside down. The...

I like your thermosiphon idea the best so far. Actually it would be a gravity fed heat pipe in this situation. I think if you can keep the inlets to the water blocks/boilers flooded then there won't be any problems with proper vapor...

Top notch work there Ron. I like how you prep those evaps..it's so much easier to lap and change captube that way. Looking forward to seeing what this beast does.

I just got the DIAMOND 7970PE53G a few weeks ago and it's unlocked. It does 1250/1800 1.2vgpu on room air and have benched 1350/1800 1.27v cold air. So far no coil whine.. the fan makes a fair bit of noise but I have a fan profile and...

Sounds like one or more of the suspension springs inside the compressor have become damaged or weak over time. Shipping damage is a common cause of this. The fix.. replace the compressor or.. quick temporary fix, do what you did in the...

That's too bad man.. I feel for you. These are still very capable cards with a good oc. Running out of options here... I'll list a few more. 1) Make sure to disbable ULPS manually... start with a fresh full uninstall + driver...

This ULPS Configuration Utilty by kiwiasian takes care of it a few seconds. http://www.overclock.net/t/1088266/ulps-gui-config-utility-enable-disable The long way: http://www.overclock.net/t/667144/crossfire-disabling-ulps

I'd definitely try baking it.. that's worked wonders for many cards. Basically pull all the plastic stuff off and bake at 392F for 10min. If you want to save the stickers you can heat them with a hair dryer and peel off....