Posts by rwpritchett

Error code 55 is for memory. Try booting with one stick.

Yes, you could run 4 fans off the dual CPU headers on this board. You just need to make sure the splitters you get are 4-pin PWM on one leg and 3-pin on the other. Some splitters have 4-pin PWM on both legs and they cause the...

Speaking of AI Suite... Has anyone here been able to get any version of AI Suite to install on the Maximus IV Gene-Z using Windows 8 x64?

I like fixing things until they break. Then it gives me reason to by more things.

Me too Me too Me too

Be sure you have set the C1E setting in the BIOS to "Enabled" in the Advanced settings tab. By default it is on "Auto" and will not allow the CPU to drop to 1600MHz.

Quote:Originally Posted by kissenger So nobody knows the answer to this?It sounds like you left the offset voltage at 'Auto'. That will get you some crazy volts. Go ahead and set your offset to "-" and select a value in the field...

Quote:Originally Posted by Zaxbys I am torn between this, the ASUS, and the ASRock If this had the Widi that the revised ASUS will have I would be all over it. I wonder if this card is compatible with the mini-pcie because it is...

No, it doesn't support secure boot... at least on my pre-GEN3 board with the latest BIOS. The Z77 Gene has secure boot though I believe.

There's a way to use the disc that comes with the motherboard to fix a borked BIOS. You'll have to research it. Read a little bit about it in Post 5501 in this thread. I don't know if that will work for you though. Maybe get a...