Posts by Worple

THe RX rads are alot thicker put with less fins per inch letting you use a lot lower fan to cool the system like a Gentle Typhoon 120mm Fan 1850RPM (AP-15) then you have low noise but the same cooling as if you had a RS360 with higher...

If you do this make a build log

voltage regulator module A voltage regulator module or VRM, sometimes called PPM (processor power module), is a buck converter that provides a microprocessor the appropriate supply voltage, converting +5 V or +12 V to a much lower...

Man i hate to see what they call alot of use

I just lost a silverstone 1500 and done this test theres nothing to it P.S. the egg RMA my unit but now mobo,cpu and ssd are on there way RMA make sure to check out everything else on your system

Just use hot water and shake the rads and blocks back and forth. Do this till you think there clean. Dont get crazy on the shaking lol

Yea you got plenty of rad surface there now you need good fans try some of THESE for RX rads

distilled water the end Water is one of the best choices for liquid cooling applications due to its high heat capacity and thermal conductivity. It is also compatible with copper, which is one of the best heat transfer materials to use...

WOW bundy now thats a rad

Lmao