it is exacly back as it was before :D same volts same temps
i couldnot believe it myselff...it was 3 months now that it ran like that and i decided to give it one more try...because i got soms CLU in...
and...
So Finaly resolved my problem
it probably was that i touched the die with my finger and contaminaded it because i cleaned ik with alcohol and a new drop of clu and im back in bussenis
yeahh baby :D:D
49x multi @ max 83C...
here is my chip on stock speeds after 10 minutes prime
:(:(
and before all this happened it was go ing easy 48x high 70s!
i hope the new haswel chip is soldered again!
well it ran fine after delid 2 ..until i desided to re aply clu to see if i could gat a few degrees more off :(
i think your right about the statics, thats the only thing i can think off to
thanks for your help man
no odd enough they didnt...
not even when i asked about it in an email
o well... im just happy i didnt have to spend another 500 euros on a new card
go gigaBYTE
