Posts by error-id10t

We're all looking for 11.6.x.....

Quote:Originally Posted by Forceman What's the part about not supporting UEFI about? If that's for the Windows install it's maybe a warning for those who've installed Windows in UEFI mode instead of BIOS, not that you have UEFI BIOS...

Don't use furmark to look at temps, I'm sure you've tried others already and temps are nice but furmark is crippled for 580s. Either way, if you want to try 1000Mhz then raise the volts from 1.15v to 1.21v and see how you go and what...

I remember few people looking for the 670 4GB SC+ mod with updated vBIOS. Volts: 1.21v Fans: 20% - 100% (I have mine under water but it shows that in AB) Core boost: 1202Mhz Power target: 172W (100%) to 200W (116%) Board max. power:...

Can someone post AS-SSD with the new firmware.. there was a mention the write access had increased again.

When you unlock the volts to 1.21v for some reason the boost increases automagically too, that's probably what you're seeing. So you'd need to mod another value to specify how high you want it to boost only.

TRIM in RAID0 and Z77 works. The only question is what OROM you have on that board, I can't remember the min. requirement anymore but the 11.5 ones work no problem .. just keep the 11.2 driver as that gives better performance.

You can use the dGPU while installing the iGPU driver, but make sure you've actually enabled iGPU in BIOS..

Quote:Originally Posted by =XE=NOVA the next line you will see VN@ you got to make sure that is there or your on the wrong line before. i think thats why i have had issues with the previous bios edits that i have done for others now...

Quote:Originally Posted by toyzruz @=XE=NOVA Unfortunately the new bios file you've sent isnt working ... same problem... I still wonder why gpuz tells me something about 3gb Memory...