Posts by Valnjes

I guess that my MBO could work in this club as well http://valid.canardpc.com/show_oc.php?id=1711263 N68C-S UCC

The UD7 rev1.0 is BAD. Rev1.1 is OK, but still not as good as many think.Why is the rev1.0 so bad? The RAM BUG's that aren't possible to fix with BIOS update - all RAM settings withhigher freq. than 1600MHz - OC failed!And NO LLC!!!...

Thanks, Fixed.

I can't have my name in it - it was tested with my Team some time ago - iSHOP Squad:www.ishop.hrI tested with the same CPU those board:ECS A990FXM-AMSI 990FXA-GD80Gigabyte GA-990FXA-UD7ASRock 990FX Fatal1tyThe rest of the setup:AMD...

I haven't seen this thread before. My old OC session with ECS v1.0: ECS A990FXM-A + FX-4100 http://valid.canardpc.com/show_oc.php?id=2432062 This is not stable frequency, this is just for validation. Most stable on Air was about 4.7GHz.

Quote:Originally Posted by MacClipper To clarify - save the BIOS or BIOS settings? Let me go look up my test rig storage hard disk later, I may still have a customised version of F Drive which allows you to save your BIOS settings...

Well, I have my Fatal1ty almost two Years - and still hard kicking board. It came with the L0.53 BETA BIOS out of the box - the first shipped board did have this version of BIOS. The only downside from ASRock to MSI/ASUS is that You...

AMI EFI keys are stolen just for Intel platforms - so AMD users are not affected. Sandy Bridge Ivy Bridge Luna Pier Cedar Trail Just Intel - so don't panic guys.

Instant flash is great! Even when i got power loss - after restoring power - the instant flash continued (just DON'T PULL the USB out of the MBO), and the MBO were alive and kicking - thats a sweet...

Does Your CPU have all the pins? Is some of them bend/broken? Does the MBO send sound error when you boot it up without the VGA and RAM?