Posts by DSP1

Now all I need is to get that Ceram!x on my Silver Arrow and it would match perfectly

On mine just using an Ultra Kaze 3000 on the back exhaust provides more than enough airflow and the case does an excellent job of quieting it. combine that with just 3 regular 80mms and a decent 120mm on the intake. One caveat though...

You might try removing the ram and cleaning the socket and contacts. additionally if your ram was warm but is now much hotter the heat spreaders may be shorting something likely a resistor you should remove them and ensure they have...

1. what are you using to test stability? if you run prime95 on blend and get an error it can be due to a number of factors (NB, HT, RAM...) if it fails on small FFTs then you no that the issue is with the cpu OC from there you can try...

There recently was a hot fix released for catalyst control center http://support.amd.com/us/Pages/Catalyst-Hotfixes.aspx that was supposed to fix artifact issues and some other problems with the 6000 series in particular. I had a...

So I decided to start slowly and work up now I am running stable at 3.96GHz @1.428V CPU-NB at 2840MHz @1.45v HT at 1890MHz and Ref. clock at 236MHz and 16.5x CPU multiplier and all ram timings are stock. It has run prime95 on blend for...

Unless your theater room is pitch black you probably want at least 2500 lumens or higher depending on your screen size. I have an old Sony vpl-px11 that's rated at 2000 lm and at 109" screen its a bit dim. You should also keep bulb...

I was thinking about going to 2400 on the CPU-NB. should I leave the HT where it is now? additionally could I then put the ram back to 1866? Sorry posted twice by accident.

I was beginning to think that was the issue. I was thinking like 2400 for CPU-NB. Should I leave the HT where it is now?

I am currently running my 1090t at 4.02GHz@1.452v When I try to prime 95 for stability tests, it will run for fine for about 45 minutes then I get a "Fatal rounding error: was 0.5 expected less than 0.4" This happens first to core #5...