Posts by LmG

The pump "tops" increase performance of the pump and allow you to use compression fittings. I used the XSPC res which also serves as a pump top. If you go res/pump combo you wont need a top, but if you're isolating your pump its a...

Luckily I have mostly everything on my 2tb HDD and just my OS on my SDD. Its due for a fresh install anyway, so as soon as i find my Windows 7 DVD's i'll re-install. Thanks for your input

After doing alot of google searching it seems like this happens alot. Some blamed it on HDMI connections. Two of my monitors only have HDMI so i use DVI to HDMI cables. Can anyone confirm that this would cause an issue?

I was considering this since i've heard the PCI-E slots can go bad, but since I've RMA'd the mobo and got a refurbed replacement I think its safe to rule that out I guess one thing i could try is a fresh install of Windows since that's...

Yes everything is up to date as far as drivers and BIOS

I've been struggling with a problem using SLi with my GPU's for a while now. Each card is on stock clocks. I've RMA'd my mobo, tried a different PSU, used different SLi bridges, different drivers. I am totally at a loss Each card...

Shall we ever find out why this picture needs uncensored??? I'm extremely intrigued

I was totally gonna troll you because watercooling 5830s seems silly and so does ice water for heat dissipation. But seeing the results, I must give you props.

If you have a truck or a good friend with one, check craigslist. You'd be surprised at what people give away and sell for cheap just to get it out of the house. Otherwise, you can look into building one which is alot of fun and makes...

Why'd you decide on a dual 40mm rad if you dont mind me asking? You can easily fit a 120.2 in the bottom of the phantom if you take out the HDD cage and if you have the new rev i think they added support up top for a 120.3 rad.