Posts by case sensitive

Please could someone with this board or the DS3 version of it (without the P at the end) measure the resistance across each of these resistors (R2722 and R2721). You don't need to remove them from the board, I can solder on resistors...

Bump

You could try doing the "bsel" mod: http://www.overclock.net/t/341123/intel-bsel-vid-mod-guide but your board would need support for 1333MHz fsb You will need the one for 1066 > 1333 but your ram frequency shouldnt change and neither...

Hi, I have a Gigabyte GA-965P-DS3P motherboard (rev 3.3) with what appears to be two missing surface mount components near the cpu socket. i think they are missing because the copper pads are completely blank (no solder on them). When...

Thanks for your help, I'll update when fixed

Hi, I recently bought a faulty HD 4870 from ebay. The seller said that the card does not work in a 16x slot but works in 4x etc. I thought that it was their motherboard at fault so bought the card. When I tested the card, I found that...

Looks like they are connected, just got to wait for the rest of the caps to arrive from Hong Kong now. Thanks for your help.

I have an XFX 9800gt with two damaged capacitors that have fallen off. The capacitors were surface mount caps but I was wondering if I could replace them with through-hole caps. This is a pic of what the card should look like, I have...

bump