Posts by xthrillkillx

Thanks you everyone for your advise on what to do. Also I apologize for saying that it was so urgent, I was really freaking out and worrying about it at the time. But, so far I managed to remove most of it so things are looking good!

Hello everyone, I've ran into a situation. I was putting non-conductive thermal paste (Tunia TX-2) on my cpu and as I was spreading it I a small amount ran over into the socket. I'm using the ASUS Rampage IV Extreme motherboard with a i7...

Thanks for the help. I decided to put a 120 dual rad in the hard drive bay and a cut a rectangle in the of bottom of last 5.25 so the top of the rad peeks out in the bay so i can hook it up to the reservoir right above it. Im going to...

Hello everybody! I need help with my haf x 942. I have the RayStorm 750 RX360 WaterCooling Kit, but i need to figure out where can i put another 120 or 2x120 rad in this case? I cant seem to think of anywhere i can put it. They will be...

anyone no good places for rads in a haf x 942 other then the top?

thanks for the help i try to see where in my case cooler master haf x 942 where i can fit another 240 btw i would like to oc the 3930k to 3.5ghz

Hi all. I want no if the XSPC Raystorm 750 RS360 Extreme kit is enough for a 3930k and 2 7970s. thanks:)

This is what i came up with for $900 on newegg. CPU Intel Core i5-2400 Sandy Bridge 3.1GHz Quad-Core $190 MoBo ASUS P8B75-V $100 GPU MSI N570GTX Twin Frozr II $230 Memory CORSAIR XMS3 8GB (2 x 4GB) DDR3 1600 $43 PSU CORSAIR Builder...

good luck

This happened to me one. I used a app called atiflash (i recommend you use that),so what you do is 1. On you card move the bios switch to the 2nd position. 2. Turn on your pc 3. Open ati flash and load the bios !!!DONT FLASH YET!!!. 4....