Posts by ruarcs30

Jaja, her snakker jeg med meg selv,hehe. Im starting to think that I might have an quite decent chip. Have I understood it right. If it is stable on smal ffts the cpu it self is stable. Then I need to get the memory stable witch...

My sensors isnt working but I cant find any hot spots on my hk so how bad can it be,hehe. But where is the fsb located? If this is stable im going up to 1.9GHz bus I figured out that at 3.9GHz the pc will not boot whit 1.25v fsb,...

Would you guys who has knowlege about intels q series consider this an safe settup? I see the temps are raising but they can get as high as 70 and no damage is done, right?

Well, after turning up the vcore to 1.44 and 1.5 on cpu fsb. If this indeed prove to be stable, what do i do next? Lowering cpu fsb a notch and try again and try to find the lowest fsb voltage that is stable at 3.9Ghz, then tuning down...

Quote:Originally Posted by Mattb2e fsb voltage is the same as fsb term voltage. If I remember correctly, going too high is a bad idea. 1.5 I believe is the max, but you should shoot for the lowest value possible. I think this...

Im alittle confused about my mb. Evga 132-yw-e179-ftw. What is cpu fsb voltage and what exactly does it do. How high can i go safly? I got decent airflow in my case... Raising the cpu fsb from 1.1 to 1.4 made it almost stable at 4Ghz...

Hello. Im trying to oc my q9550 and is stable at 3.72Ghz @1.376vcore. Any who cares to explain to me what the difrent stuff are? cpu n/2 ratio? And what about cpu fsb voltage? This is connected to the fsb for the cpu, right? How high...

Quote:Originally Posted by RickyOG90 First question, what are your computer's specs and second, how come you had to push your cpu voltage all the way up to 1.35 for 3.5ghz? i have my q9550 overclocked to 3.83ghz at only...

Hi. I have some question regarding 132-YW-E179 790i FTW and oc q9550. Any who has oc on this mb or a simular one? I have seem to hit a wall around 3.5Ghz. But to tell the truth, I have no clue about how intels cpu and mb...

I have allways liked people from Canada. And now an canadian lad offeres to send me the parts for free Not bad