Posts by bwhiten

An excellent folders deal on a set of four 6166HE, 12-Core Opterons on the [H] DC FS/FT thread. A good entry point for those starting a new 4P build. Not sure if I am allowed to post a link to that site.

Then go ahead and use the -oneunit flag every time you start fah. When you start fah with the -oneunit flag, it goes through the sequence of: downloading a WU, folds the WU, uploads the WU results, then stops. To continue you would need...

You could try reflashing if that has not been attempted.

Quote:Originally Posted by k4m1k4z3 Has anyone here dealt with dead parts for these builds? My board went bad a few months ago, I just got it back from RMA 2 days ago, they said it worked fine, but when I tried it the board will not...

Condolences. Lost my dad 26 years ago to lung cancer. Folding in his memory is a nice addition to the memories you already have.

Quote:Originally Posted by G3RG ......For 6128's I'd say you could do 240mhz guaranteed. Thats a 20% oc 2400MHz would be better.....

No problem. Numbers I promised. 6128s with an OC to 2.45GHz 6901: TPF = 8:16 PPD = 248,755 6903: TPF = 18:36 PPD = 330,953 6904: TPF = 25:27 PPD = 338,084

Only had an issue like that when I pushed an OC too high. You can let it finish the WU, if it will, and add -oneunit to the fah command line. That will stop it at completion. Once it stops you can run some memory test. The MEMTEST that...

The highest OC I was able to acheive on the 6128s I have, pulled about 610W. I'll try to remember to look up the PPD that acheived so you can compare costs. 11.5 cents per sounds high to me. I need to check my utility bill. I would...

Rough estimate but useable based on personal experience and word-of-mouth: 6172: 12 cores each = 24 cores, stock clock: 2.1GHz, reasonable OC: 25% = 2.625GHz, 24 * 2.625 = 63 "GigaCores" 6128: 8 cores each = 32 cores, stock clock:...