Posts by Jormapaappa

Is 1,368v too high for 24/7? With that voltage i can get 3500Mhz stable. Edit: It wasn't stable at all. Now I have 3487Mhz, CPU-Z 1,328v. Higher voltages are unstable because of my vdroop mod.

What bios do you have? Those temps are not dangerous, mine Q9300 climbs up to 72 under Prime95.

Duron 1,6Ghz @ 2,24Ghz. I unlocked multi and mobile mode. Ran with stock Xp cooler and mobo without pci/agp-lock http://hwbot.org/submission/2250868_jormapaappa1235_superpi_duron_1.6ghz_54sec_359ms/ http://aijaa.com/006619983815

I'd like to join: http://valid.canardpc.com/show_oc.php?id=2322139

I think, there reads: 4BC904K ACT86

I didn't push it any higher anymore, the frequency is now 3450Mhz. Here are the voltages: Cpu Vcore: 1,358v from bios (1,320v stable with vdroop mod CPU-Z) FSB Termination voltage: 1,34v DRAM voltage: 1,7v NB: 1,25v (stock) Ram is...

It was on first page... It must be new... :D Hehe, didn't notice that

Just set more Vcore from bios. I've done vmod to my P5E3, bios set voltage is 1.4, idle voltage 1,360 and under IBT 1,344 (Before 1,360 and 1,320)

I sure will Okay, the CPU is now stable at 1,38 bios (1,34v - 1,32v) @ 3450Mhz. I think it could go a little higher, still trying.

Well, I am young and curious, I want to test new things I paid P5E3 Deluxe + Q9300 58e, so they were very cheap