It has the 6970 shaders and has a bios switch, i havent tried to use stock 6950 but i dont think it should make any difference, i mean it works in a normal atx board why shouldn't it work in a server board?
Got a bit of a problem here, i cant figure it out myselve so i need your help!
Last week i started an oldscool project with:
Msi 5000x speedster
2x xeon 5345 2.33ghz
4gb dd2 FBDIMM
2x Prolimatech megahalems modded on...
Quote:Originally Posted by theseekeroffun Two pumps are always better, less noise, redundancy and piece of mind.
As i said, i am using my pump on the lowest rpm, so for the noise you dont have to do it. My rad is passive and i get...
I would suggest 1, becouse i am using a d5 with ek top now, going from:
500mm res>pump>cpu>mosfet 1>mosfet 2> mb block> gpu> 3 meter to rad> Rad (large 1 meter long AC rad with 18 pipes)>3 meter tube>res
Most of the 1080 rads are not...
First of all my specs:
Intel i7 920
Ocz gold ddr3 6gb ram
Fully wc'ed asus p6t deluxe v2
Last week i traded a asus p6t deluxe for my asus sabertooth motherboard, becouse i had lying some waterblocks that couldn't fit the...