Posts by Magi8800

Ill double check but im pretty sure you should be able to use the stock timming's. Just more volts needed. Think mine was defaulting to 1.45 and it needs to be 1.65v, soon as I changed that it started booting like a champ. Should be a...

I have the same board and same problem with 1600mhz ram I looked up the ram on manufactures website and it gave me the proper settings THink is was just a drop of 1 in the final latency. FIrst just try setting the voltage to what it...

He trying to precool the water exiting the cpu before hitting the GPU. Even with one rad GO CPU first then GPU the CPU is much colder. Mine runs at like 20 degrees whiel the GPU would be 60 - 70. So it would warm your CPU up the other way.

Is it a sealed system Like H50 - 70 - 100 all in one kit. Or does it have a res? If it has a res, detach the in and out tubes to the res and use a hose barb to link them so its completely sealed. Then you can lay it flat on the seat or...

Hey, sorry for the lack of updates, its been sitting half finished for a month. Stuff keeps coming up, hopefully I get a few hours free to work on it soon. Cobalt is the best? I figured the HSS would be good since its harder then...

I used just Universal Clear Long Life auto coolant with tap water like 30/70 so its not too thick. Works awesome, been running for over a year. No algae or anything.

If the 550TI is cheaper then the 7770 get it, it is alot faster 98bps compared to 72. Thats why it takes more power the memory is better.

550i is cheap but if its not much more for a 560 I would get it just for more future proof. Still 98GBPS is pretty good. My 460 is only 115. At its awesome quiet and cold. http://www.gpureview.com/show_cards.php?card1=647&card2=657

I think using some JB weld or similar will work perfect for sealing it all up.

Finally some new photos, sorry 'bout the delay. Had a bit of trouble with bits breaking off so its not as pretty as I though it would be. Got the issue solved now I think, cutting fluid is great. Going to cap off these collars and...